Instructions

STEP 1

First thing is to apply Xtreme1200™ into the actual crack.

STEP 2

Also apply the Xtreme1200™ in the horizontal mortar areas where the vertical carbon fiber strap will be laid.

STEP 3

Smooth out and push the Xtreme1200™ into the crack and also the horizontal mortar areas.

STEP 4

Now eject the Xtreme800™ into the paint tray (tray and roller provided in our kit). Note: due to temperature changes always hand mix Extreme 800 with wooden paddle in painting tray to secure the proper mix.

STEP 5

Roll a coat of the Xtreme800™ onto the vertical area between the vertical mortar of the cement blocks where the carbon fiber strap will lay.

STEP 6

Be sure that vertical area is well saturated with the Xtreme800™.

STEP 7

Unroll the carbon fiber strap onto the moist Xtreme800™.

STEP 8

Work out any air pockets or wrinkles.

STEP 9

Roll on top another coat of the Xtreme800™.

STEP 10

After a couple of days of drying then paint over the carbon fiber strap with regular wall paint. The strap is very unobtrusive and hides well when painted.

Do NOT follow this link or you will be banned from the site!